Sensor Paver Finisher

Product Details:

We are dealing in HSP-075 Sensor Paver Finisher. HSP-045 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HSP-075 has been gradually revived and upgraded looking over customer’s requirements. In HSP-075’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not lose contact with the ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides a better grip on the ground.

Specifications:

Power Unit:

·         Engine: Kirloskar Make Water-Cooled Electric Start Diesel Engine, Model 6R 1080 Ta1, 158 Hp  @ 2300 Rpm Or Equivalent.

·         Electrical System: 12 V DC

·         Emission Standard: BS-III

·         Speed Reduction Gear Box: Two Speed Reduction Gearbox to Achi Eve Low Speed For Paving And High Speed For Traveling

Performance:
Laying Suitability:

·         Option 1: Bituminous Material

·         Option 2: Bituminous, Wet Mix, Gsb, Dlc, Dbm Material (Dual Purpose)

·         Door Traction & Conveyour Pump – Motor: Sauer Danfoss, Germany Or Equivalent

Screed:

·         Screed Width: 2.5 M (8’ 2 1⁄2”) Basic Width Hydraulically, Extendable Up to 4.5 M (14’ 9 1/8”), Bolt On, Extension Up to 5.5 M (18’ 1⁄2”), Option: Attachment Up to 7.5 M

·         Crown (Manual): -1”/+4”

·         Screed Heating: Yes, With 8 Lpg Burner Facility

·         Screed Vibrating: Yes, Infinitely Variable (0 to 50.00Hz)

·         Screed Tamping: Yes, Infinitely Variable (0 to 33.33Hz)

Operator System:

·         Control Panel Type: Sliding

·         Operator Seat Double: Operator Seat

·         Travelling Function: Left & Right Side

·         Operating Function: Left & Right Side

·         Steering: Hydraulic

·         Brake: Caliper Disc Brake On Both The Sides

·         Conveyor & Auger System:

·         Conveyor & Augur 2 Sets, One On Each Side

·         Conveyor Drive: Hydraulic

·         Conveyor Function: On/Off Switch

·         Augur Screw Size: Dia 300Mm (12”)

·         Augur Material: Ni-Hard/High Chromium Steel Material
Machinery Accessories:

·         Canvas Canopy, Working & Travelling Parts, Tool Kit With Jack.

Additional Information:

• Item Code: HSP045S

Product Details:

We are dealing in HSP-075 Sensor Paver Finisher. HSP-045 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HSP-075 has been gradually revived and upgraded looking over customer’s requirements. In HSP-075’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not lose contact with the ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides a better grip on the ground.

Specifications:

Power Unit:

·         Engine: Kirloskar Make Water-Cooled Electric Start Diesel Engine, Model 6R 1080 Ta1, 158 Hp  @ 2300 Rpm Or Equivalent.

·         Electrical System: 12 V DC

·         Emission Standard: BS-III

·         Speed Reduction Gear Box: Two Speed Reduction Gearbox to Achi Eve Low Speed For Paving And High Speed For Traveling

Performance:
Laying Suitability:

·         Option 1: Bituminous Material

·         Option 2: Bituminous, Wet Mix, Gsb, Dlc, Dbm Material (Dual Purpose)

·         Door Traction & Conveyour Pump – Motor: Sauer Danfoss, Germany Or Equivalent

Screed:

·         Screed Width: 2.5 M (8’ 2 1⁄2”) Basic Width Hydraulically, Extendable Up to 4.5 M (14’ 9 1/8”), Bolt On, Extension Up to 5.5 M (18’ 1⁄2”), Option: Attachment Up to 7.5 M

·         Crown (Manual): -1”/+4”

·         Screed Heating: Yes, With 8 Lpg Burner Facility

·         Screed Vibrating: Yes, Infinitely Variable (0 to 50.00Hz)

·         Screed Tamping: Yes, Infinitely Variable (0 to 33.33Hz)

Operator System:

·         Control Panel Type: Sliding

·         Operator Seat Double: Operator Seat

·         Travelling Function: Left & Right Side

·         Operating Function: Left & Right Side

·         Steering: Hydraulic

·         Brake: Caliper Disc Brake On Both The Sides

·         Conveyor & Auger System:

·         Conveyor & Augur 2 Sets, One On Each Side

·         Conveyor Drive: Hydraulic

·         Conveyor Function: On/Off Switch

·         Augur Screw Size: Dia 300Mm (12”)

·         Augur Material: Ni-Hard/High Chromium Steel Material
Machinery Accessories:

·         Canvas Canopy, Working & Travelling Parts, Tool Kit With Jack.

Additional Information:

• Item Code: HSP-045HD3

Product Details:

We are dealing in HSP-075 Sensor Paver Finisher. HSP-045 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HSP-075 has been gradually revived and upgraded looking over customer’s requirements. In HSP-075’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not lose contact with the ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides a better grip on the ground.

Specifications:

Power Unit:

·         Engine: Kirloskar Make Water-Cooled Electric Start Diesel Engine, Model 6R 1080 Ta1, 158 Hp  @ 2300 Rpm Or Equivalent.

·         Electrical System: 12 V DC

·         Emission Standard: BS-III

·         Speed Reduction Gear Box: Two Speed Reduction Gearbox to Achi Eve Low Speed For Paving And High Speed For Traveling

Performance:
Laying Suitability:

·         Option 1: Bituminous Material

·         Option 2: Bituminous, Wet Mix, Gsb, Dlc, Dbm Material (Dual Purpose)

·         Door Traction & Conveyour Pump – Motor: Sauer Danfoss, Germany Or Equivalent

Screed:

·         Screed Width: 2.5 M (8’ 2 1⁄2”) Basic Width Hydraulically, Extendable Up to 4.5 M (14’ 9 1/8”), Bolt On, Extension Up to 5.5 M (18’ 1⁄2”), Option: Attachment Up to 7.5 M

·         Crown (Manual): -1”/+4”

·         Screed Heating: Yes, With 8 Lpg Burner Facility

·         Screed Vibrating: Yes, Infinitely Variable (0 to 50.00Hz)

·         Screed Tamping: Yes, Infinitely Variable (0 to 33.33Hz)

Operator System:

·         Control Panel Type: Sliding

·         Operator Seat Double: Operator Seat

·         Travelling Function: Left & Right Side

·         Operating Function: Left & Right Side

·         Steering: Hydraulic

·         Brake: Caliper Disc Brake On Both The Sides

·         Conveyor & Auger System:

·         Conveyor & Augur 2 Sets, One On Each Side

·         Conveyor Drive: Hydraulic

·         Conveyor Function: On/Off Switch

·         Augur Screw Size: Dia 300Mm (12”)

·         Augur Material: Ni-Hard/High Chromium Steel Material
Machinery Accessories:

·         Canvas Canopy, Working & Travelling Parts, Tool Kit With Jack.

Additional Information:

• Item Code: HI-055HDSP

Product Details:

Being a well-established organization, we are engaged in providing a distinguished range of HSP-045 Hydrostatic Sensor Paver Finisher. HSP-045 is a wheel mounted sensor paver finisher for those who want better performance compare to mechanical pavers at a very economical rate.

Specifications:

Power Unit:

·         Electrical System: 12 V DC

·         Emission Standard: BS-III

·         Speed Reduction Gear Box: Two Speed Reduction Gearbox to Achieve  Low Speed For Paving And High Speed For Traveling
Performance:
Laying Suitability:

·         Option 1: Bituminous Material

·         Option 2: Bituminous, Wet Mix, Gsb, DLC, Dbm Material (Dual Purpose)

·         Door Traction & Conveyor Pump – Motor: Sauer Danfoss, Germany Or Equivalent

Screed:

·         Screed Width: 2.5 M (8’ 2 1⁄2”) Basic Width Hydraulically, Extendable Up to 4.5 M (14’ 9 1/8”), Bolt-On, Extension Up to 5.5 M (18’ 1⁄2”), Option: Attachment Up to 7.5

·         Crown (Manual): -1”/+4”

·         Screed Heating: Yes, With 8 Lpg Burner Facility

·         Screed Vibrating: Yes, Infinitely Variable (0 to 50.00Hz)

·         Screed Tamping: Yes, Infinitely Variable (0 to 33.33Hz)

Operator System:

·         Control Panel Type: Sliding

·         Operator Seat Double: Operator Seat

·         Travelling Function: Left & Right Side

·         Operating Function: Left & Right Side

·         Steering: Hydraulic

·         Brake: Calliper Disc Brake On Both The Sides

Conveyor & Auger System:

·         Conveyor & Augur 2 Sets, One On Each Side

·         Conveyor Drive: Hydraulic

·         Conveyor Function: On/Off Switch

·         Augur Screw Size: Dia 300Mm (12”)

·         Augur Material: Ni-Hard/High Chromium Steel Material

Machinery Accessories:

·         Canvas Canopy, Working & Travelling Parts, Tool Kit With Jack.

Additional Information:

• Item Code: HSP-075