Road Pver Finisher

Product Details:

Model HSP-045

Key Features:

1. Hydrostatic Transmission
2. Engine Power 105 HP @ 2200 RPM
3. Laying Capacity 200 TPH
4. Hopper Capacity 4.25 CM
5. Paving Width 2.5 mtr to 5 mtr
6. Weight 11,300 kg
7. Two Wheels on Rear Axle
8. MOBA (Germany) Make Electronic Sensor
9. Double Operator Seat

Product Description

HSP-045 is a wheel mounted sensor paver finisher for those who want better performance compare to mechanical pavers at a very economical rate. HSP-045 offers ease of operating and maintaining it.

Smaller, stronger, and economical sensor paver finisher model HSP-045 comes with hydrostatic transmission, hydraulic drive for conveyor, sliding type control panel, dual operator seats, 2 nos. rear wheels, hydraulically extendable screed with vibration and heating facility, and MOBA (Germany) make sensor device.

HSP-045 has basic screed of 2.5 meters width and it is hydraulically extendable up to 5 meters.

There is one optional feature available for HSP-045.

• Material Suitability
  1. Bituminous Material
  2. Bituminous, Wet Mix, GSB, DLC & DBM Material

Additional Information:

• Production Capacity: 4 PER MONTH

Product Details:

Model HI-055

Key Features:

1. Hydrostatic Transmission
2. Engine Power 130HP @ 2200 rpm
3. Laying Capacity 300 TPH
4. Hopper Capacity 4.25 CM
5. Paving Width 2.5 mtr to 6 mtr
6. Weight 14,00 kg
7. Four Wheels on Rear Axle
8. MOBA (Germany) Make Electronic Sensor
9. Double Operator Seats

Product Description

HI-055 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HI-055 has been gradually revived and upgraded looking over customer’s requirements.

HI-055 has combination of features like hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration, and heating facility, and MOBA (Germany) make sensor device for automatic slope & grade control.

In HI-055’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

HI-055 has basic screed width of 2.5 meters and it is hydraulically extendable up to 4.5 meters and it can be further extended through bolt on extension up to 6 meters.

There are two optional features available for HI-055.

• Material Suitability
  1. Bituminous Material
  2. Bituminous, Wet Mix, GSB, DLC & DBM Material

Product Details:

Model HI-055

Key Features:

1. Hydrostatic Transmission
2. Engine Power 130HP @ 2200 rpm
3. Laying Capacity 300 TPH
4. Hopper Capacity 4.25 CM
5. Paving Width 2.5 mtr to 6 mtr
6. Weight 14,00 kg
7. Four Wheels on Rear Axle
8. MOBA (Germany) Make Electronic Sensor
9. Double Operator Seats

Product Description

HI-055 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by HI-TECH. HI-055 has been gradually revived and upgraded looking over customer’s requirements.

HI-055 has combination of features like hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration, and heating facility, and MOBA (Germany) make sensor device for automatic slope & grade control.

In HI-055’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

HI-055 has basic screed width of 2.5 meters and it is hydraulically extendable up to 4.5 meters and it can be further extended through bolt on extension up to 6 meters.

There are two optional features available for HI-055.

• Material Suitability
  1. Bituminous Material
  2. Bituminous, Wet Mix, GSB, DLC & DBM Material

Additional Information:

• Production Capacity: 4 per month
• Delivery Time: 2-3 weeks